ABC Design Turbo S 4F Mode d'emploi télécharger pdf (Page 13)

EN - 08

15. Opening the carrycot

Lift the side panels of the carrier.

Extend and secure the side panels by pushing the two retainers outwards into the mountings.

Make sure that the retainers are securely engaged.

16. Attaching the cot bumper

Lay the bumper in the cot, folding the top part over the edge of the carrycot.

17. Inserting the mattress

Insert the mattress in the cover.

Lay the mattress on the base.

NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.

18. Fitting the cot on the pram

Recline the back of the seat. Position the carrycot on the pram.

Take hold of the strap which is tted to the rear of the cot and pull it through the opening provided in the

seat cover.

Fasten and tighten the belt on the rear of the backrest.

Flip up the footrest at the lower end of the cot and secure the strap around the footrest. Fasten and tighten

the strap.

19. Fitting the apron

Fit the closed end of the apron over the lower end of the carrycot.

Extend the apron over the cot.

Secure the ends of the apron with the snap fasteners provided on the cot and cover

20. Fitting the foot muff

Undo the strap and position the liner on the seat.

Pull the ve straps through the openings provided in the cover.

Now you can fasten the apron with the zip fastener on the liner.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Pas de commentaire

ABC Design Turbo S 4F Mode d'emploi Page 13